PLASMA CUTTING CHART
This chart is a guideline only. For more specific information, please contact your Loftis representative.
Loftis has a fully integrated CAD Department to handle most file types.
Preferred Files: .dxf .dwg .iges .step .stp .pdf
No Print, No Problem…Loftis offers 2D Scanning – 4ft x 4ft
| THICKNESS RANGE | MAXIMUM TABLE CUTTING CAPACITY |
OVERALL TOLERANCE BY THICKNESS |
MINIMUM HOLE SIZE |
|---|---|---|---|
| Plasma
1/8” to 1 1/2” thick Flame 1/8” to 6” thick |
Up to 120” x 240” *Dependent on plate thickness |
Less than 5/8” thick = 1/16” 2” to <4” = 3/16” 4” to <8” = 1/4” 5/8” = +/- 1/16” 5/8” to 2” = +/- 1/8” 2 1/4” to 3 1/2” = +/- 3/16” 4” to 6” = +/- 1/4” |
Minimum hole size equal to thickness of the plate |
ADVANTAGES INCLUDE:
- Speed: Plasma cutting is known for its high cutting speed, making it suitable for large-scale industrial applications.
- Versatility: Can cut a wide range of electrically conductive materials and thicknesses.
- High-quality edge cuts.
- Minimal clean-up.
- Small heat-affected zone.
- Etching and beveling capabilities.
- Thick material capability.
- Good edge quality.
- In-house stress-relieving, normalizing, and annealing.
